尼康 Nikon COOLPIX S2550固件下載 輕便型數(shù)碼照相機COOLPIX S2550 win版 os版 升級 刷機Ver.1.1 F-S2550-V11W.exe(約4.60 MB) 新版本 windows MacOS 免費

COOLPIX S2550 固件

This?software?is for upgrading the COOLPIX?S2550 firmware from v1.0 to v1.1. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.

Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.

Modifications enabled in this version

• When the Charging AC Adapter EH-69P and USB Cable UC-E6 were connected to the camera to charge the Rechargeable Li-ion Battery EN-EL19 with the EN-EL19 at or very near full exhaustion, the battery sometimes could not be charged.?This issue has been resolved.?

How to?verify your cameras current firmware version

If the latest firmware version is already installed on your?S2550 you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the?MENU button?to display the menu screen.??
3. Press the multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.?
4. Highlight Firmware version from the setup menu and press the OK button.
5. The camera's firmware version will be displayed.??
6. Turn off the camera.

Quick Install Guide

This is the quick install guide, for detailed instructions click the link below.

Power the camera from AC adapter unit or use a fully charged battery.

1. Create a new folder with an appropriate name on your computer's hard drive.
2. Download the Windows (.EXE)?or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
3. Run the downloaded file to create a folder called S2550Update which contains the firmware folder.
4. Use a card reader or similar device to copy the?firmware folder to the root directory of a formatted memory card.???
5. Insert the memory card into the camera's memory card slot and turn on the camera.
6. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
7. After the upgrade is complete, turn the camera off and remove the memory card.
8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

System Requirements