在線
客服
在線客服服務時間：9:00-19:00
QQ客服：
旺旺客服：
客服
熱線
18623896844
13264445812
18612707474
7*14小時客服服務熱線
添加
微信
風清揚官方微信
打賞
站長
感恩支持
尼康 Nikon D200固件下載 數碼單鏡反光照相機D200 win版 os版 升級 刷機A:Ver.2.01/B:Ver.2.01 F-D200-V201W.exe(約1.09 MB) 新版本 windows MacOS 免費
D200 固件
選擇您的操作系統。
- Windows
- Mac OS
該軟件更新程序針對用戶所有的以上產品（“相關產品”），并且僅在用戶接受了下列協議時提供。選擇“接受”并單擊“下載”，即表示您接受該協議的條款和條件。開始下載之前請確保您已理解該協議條款。
About this firmware update
This service provides software for upgrading D200 A and B firmware to Ver 2.01. When performing this firmware upgrade, be sure to upgrade both A and B firmware. Correct operation of your camera is not guaranteed if only A or B of the firmware is upgraded without upgrading the other part.
This firmware resolves an issue which, in rare cases, causes the battery indicator to blink whilst shooting regardless of the level of charge in the battery.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D200, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the camera on.
2. Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
3. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the software from the link below and extract the firmware file "A2000201.bin" (A firmware) or "B2000201.bin" (B firmware).
2. Format an approved memory card in the camera.
3. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader.
4. Copy only of the firmware files "A2000201.bin" (A firmware) or "B2000201.bin" (B firmware) to the top level of the memory card. Do not copy both files to the card at the same time.
5. Disconnect the camera from the computer (if using an memory card reader then insert the memory card to the camera)
6. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
7. Select "Update" and follow the camera's on-screen menus. Do not turn the camera off during upgrade.
8. When a message displays that the upgrade is complete, turn the camera off.
9. Repeat steps 2 - 8 to perform the second firmware update.
10. Re-format the memory card.
11. Turn the camera on again to confirm that A and B?firmware has successfully been updated to v2.01.
For detailed instructions on how to install this firmware update click here
System requirements
System requirements |
5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
Download file |
F-D200-V201W.exe (1.08 MB) |
About this firmware update
This service provides software for upgrading D200 A and B firmware to Ver 2.01. When performing this firmware upgrade, be sure to upgrade both A and B firmware Correct operation of your camera is not guaranteed if only A or B of the firmware is upgraded without upgrading the other part.
This firmware resolves an issue which, in rare cases, causes the battery indicator to blink whilst shooting regardless of the level of charge in the battery.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D200, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the camera on.
2. Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
3. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the software from the link below and extract the firmware file "A2000201.bin" (A firmware) or"B2000201.bin" (B firmware).
2. Format an approved memory card in the camera.
3. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader.
4. Copy only of the firmware files "A2000201.bin" (A firmware) or "B2000201.bin" (B firmware) to the top level of the memory card. Do not copy both files to the card at the same time.
5. Disconnect the camera from the computer (if using an memory card reader then insert the memory card to the camera)
6. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
7. Select "Update" and follow the camera's on-screen menus. Do not turn the camera off during upgrade.
8. When a message displays that the upgrade is complete, turn the camera off.
9. Repeat steps 2 - 8 to perform the second firmware update.
10. Re-format the memory card.
11. Turn the camera on again to confirm that A and B?firmware has successfully been updated to v2.01.
For detailed instructions on how to install this firmware update click here
System requirements
System requirements |
Power PC G3 or better. |
Download file |
F-D200-V201M.sit (4.0 MB) |
PDF文件可使用免費的Adobe? Reader?軟件進行查看。
下載Adobe? Reader?。